NS115P / NS115 Series

Excellent in long term stability
0.1% R.O. accuracy is available (including non-linearity, hysteresis and repeatability)
Small size and light weight, horizontal cable output type is possible
Excellent in solidity and surge pressure
Attached zero point adjustment

Specifications
Rated capacity	500 kPa ~ 10 MPa (NS115P/High-accuracy type) 5 MPa ~ 50 MPa (NS115/Standard)
Safe overload	200% R.C.
Ultimate overload	300% R.C.
Accuracy	0.1% R.O. (NS115P/High-accuracy type) 0.5% R.O. (NS115/Standard type) (including non-linearity, hysteresis and repeatability)
Rated output	Current: 4 mA ~ 20 mA (2-wire method, Load resistance ≤500 ohm, at 24 V) Voltage: 0 V ~ 5 V, 0 V ~ 10 V (Load resistance ≥5 kohm)
Zero adjustment range	±1%
Power supply voltage	DC 24 V(18 V ~ 28 V)
Power consumption	Approx. 30 mA
Insulation resistance	≥1,000 MΩ (DC 50 V)
Temp. range, compensated	-20 ℃ ~ 70 ℃
Temp. range, safe	-30 ℃ ~ 80 ℃
Temp. effect on zero	±0.15% R.O./10℃ (NS115P/High-accuracy type) 0.5% R.O./10℃ (NS115/Standard type)
Temp. effect on output	±0.15% LOAD/10℃ (NS115P/High-accuracy type 0.5% LOAD/10℃ (NS115/Standard type)
O-ring seal	FKM4-class D (High-accuracy type), NBR (Standard type) Dependent on the medium.
Class of protection	IP67 or equivalent
Material of pressure hole	SUS316L (High-accuracy type), SUS304L (Standard type)
Material of cover	SUS316 (High-accuracy type), Aluminum (Standard type)
Material of pressure diaphragm	Single crystal sapphire
Mounting screw	1/8 ･ 1/4 ･ 3/8G{PF}, {PT}
Weight	NS115: Approx. 200 g, NS115P: 250 g (main body only)
Tightening torque	20 N･m ~ 40 N･m