DC002 Series

Excellent noise tolerance
High precision measurement can be performed by the excellent temperature compensation
Decrease the error factor with the use of an amplifier

Specifications
OIML accuracy class	OIML R60 C6
Maximum scale interval	6,000
Rated capacity	10 t ~ 40 t
Minimum detected scale (Vmin)	0.625 kg ~ 2.5 kg
Safe overload	150% R.C.
Ultimated overload	200% R.C.
Rated output	1,000,000 count ±500 count
Non-linearity	0.012% R.O.
Hysteresis	0.012% R.O.
Repeatability	0.010% R.O.
Creep	0.008% R.O./30 min
Zero return	0.008% R.O./30 min
Power supply voltage	DC7.5 V ~ DC15 V
Power consumption	DC35 mA (at DC12 V of power supply)
Insulated resistance	100 MΩ or more (DC50 V)
Temp. range, compensated	－10℃ ~ 40℃
Temp. range, safe	－20℃ ~ 70℃
Temp. effect on zero balance	0.014% R.O./10℃
Temp. effect on output	0.010% LOAD/10℃
Digital output Signal	Differential signal (Conforming to RS-485)
Data output frequency	160 times/s at maximum
Baud rate	57,600 bps
Data bit length	7 bit
Parity bit	Odd
Stop bit	1 bit
Terminator	CR
Transmission method	Half duplex
Synchronous method	Start-stop synchronization
Address	0 ~ 9
No. of Connectable unit	Up to 8 units
Transmission data	ASCII Code
Standard function	Digital filter, Stabilization filter, A/Z, A/Z OFF
Cable	φ7.0, 4-cores shielded 12 m cable and cable end is separated. (DC002-40T: 15 m cable)
Protection class	IP68 or equivalent
Material of element	Alloy steel
Material of cover	Stainless steel (lost wax)
Allowable horizontal moving length	10 mm (Please set the stopper of truck scale within 5 mm.) Recomended movable range is 2 mm ~ 3 mm.
Accessory	Guide ring, Inspection data sheet

List of Part Numbers
Parts No.	Rated capacity	Minimum detected scale (Vmin)	Natural frequency	Rated displacment	Weight (Approx.)
DC002-10T	10 t	0.625 kg	3 900 Hz	0.2 mm	4.5 kg
DC002-20T	20 t	1.25 kg	5 500 Hz	0.2 mm	4.5 kg
DC002-25T	25 t	1.563 kg	6 000 Hz	0.2 mm	4.5 kg
DC002-30T	30 t	1.875 kg	6 700 Hz	0.2 mm	4.5 kg
DC002-40T	40 t	2.5 kg	5 600 Hz	0.2 mm	6.5 kg

Options
Mounting attachment (AIC-005 B), Mounting attachment with slide stop mechanism (CCA-CC002-※)