NS100A Series

Highly accurate pressure transmitter 0.2% R.O. as a standard by SOS technology (including non-linearity, hysteresis and repeatability). 0.1% R.O. is also available as high accuracy type.
SOS technology enables high reliability and durability
Can correspond to absolute pressure and compound pressure
Small size and light weight
Wide pressure range from 200kPa to 50MPa

Specifications
Rated capacity	200 kPa ~ 50 MPa
Safe overload	200% R.C.
Ultimate overload	300% R.C.
Accuracy	0.2% R.O. (including non-linearity, hysteresis and repeatability)
Rated output	Current: 4 mA ~ 20 mA (2-wire method, load resistance ≤500 ohm, at 24 V) Voltage: 0 V ~ 10 V (Load resistance ≥5 k-ohm)
Response frequency	1 kHz
Power supply voltage	DC 24 V(18 V ~ 28 V)
Power consumption	Approx. 30 mA
Insulation resistance	≥1,000 MΩ (DC 50 V)
Temp. range, compensated	-20 ℃ ~ 70 ℃
Temp. range, safe	-30 ℃ ~ 80 ℃
Temp. effect on zero	0.2% R.O./10 ℃
Temp. effect on output	0.2% LOAD/10 ℃
Cable	φ4.7, 2 m shielded cable directly attached, cable end separated (cable attached type)
Connector	R03-RB5F (receptacle)
Class of protection	IP44 or equivalent (main body only)
Material of pressure hole	Stainless steel
Material of cover	Aluminum alloy (with almite processing)
Material of pressure diaphragm	Single crystal sapphire, etc.,
Mounting screw	G3/8{PF}
Weight	Approx. 200 g
Tightening torque	20 N･m ~ 40 N･m {2.04 kgf･m ~ 4.08 kgf･m}
Special specification	NS100A-D6: Guaranteed accuracy 0.2%R.O. at negative side. Power supply voltage: ±DC15 V NS100A-H: Amplifier part is separated. (highest, environmental temperature is 200℃) NS100A-S70: IP67 or equivalent waterproof construction with zero adjustment factor) NS102: Pressure inlet port : φ10